Supercharger Kit Mini

BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+

BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+

BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+  BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+
We are a specialist UK Based Company. We provide rapid dispatch to ensure. That your item arrives quickly. Re dedicated to providing a 5 star.

This ad is for a snout/nose rebuild bearing and seal set including oil for the Eaton M45 supercharger. All bearings used are high quality SKF bearings selected to match the high speed, temperature and specific supercharger clearances as required by OE specification.

Vehicle: BMW Mini John Cooper Works (JCW) 1.6 Ltr. 1 x SKF OE Spec Outer Bearing - 1 x SKF OE Spec Inner Bearing - 1 x Snout Seal - 185ml of the oil in a reusable 200ml plastic bottle / 145ml Front + 40ml For rear if desired. Snout bearings and seals are one of the most common element to wear out on a supercharger as they are taking the undamped strain of the drive belt.

Fortunately with a few workshop tools such as a hydraulic press and if needed a blow lamp they can be replaced with this kit. A major sign that your bearings might need to be replaced is a rattle from the supercharger at idle and when worse excessive supercharger noise although this can also be a sign of futher bearing failure. Most motor manufacturers overlook the strain placed on oil by high rotational speeds of superchargers and treat the oil as being filled for life - this is not good practice!

Often, by 40 or 50,000 miles and certainly at higher mileages, the oil can come out like old gravy. Of course, that's usually long past the time that warranties have run out - but by this time the vehicle makers are unconcerned. To preserve supercharger life, the oil needs changing and we recommend this is done by no later than 40,000 miles. Another very common failure is the sprung coupler that connects the snout drive to the rotors inside.

In most cases a rattle from the supercharger is caused by this but can be remedied very easily. We always advise inspecting the isolator thoroughly, common failures are broken springs and cracked plastic.

Look carefully as hairline cracks will open up when in service, this also applies to ageing solid couplers. Please note that this kit does NOT include an isolator however if interested we also supply standard and uprated isolators seperately and where applicable rebuild sets with an isolator inlcuded. If you not have the workshop tools required or simply do not wish to undertake the task yourself Powerhouse also offer rebuild services for snouts to whole superchargers. Please see our other items for our rebuild services. Powerhouse Automotive (UK) Ltd is based in Chesterfield, England. We supply the UK and world retail and trade markets with uprated supercharger pulleys for Jaguar and Range Rover cars. We also offer rebuild services for Eaton superchargers used on these vehicles, and stock a range of bearing kits for home repair. Under our BrakemastersTM trading arm, we are UK and world leaders in motorcycle brake caliper rebuild services and seal kits. Specialising in motorcycle brakes for years, we have developed an unrivalled range of components and application knowledge. We are also official agents for Highpower Wizards of Nos nitrous oxide systems, with 25 years' enthusiastic experience of nitrous injection. Weekend orders (2pm Friday onwards) cannot be processed until Monday. Those dates are NOT guarantees, they are'best possible', and actual times can be much slower. UK Customers : UK 2nd class small packet post can take a week. We have no control over this, so please try to accept that we are not responsible for slow post. If you require tracking, please select the additional cost services at checkout. If we have sent an incorrect or faulty item, we will of course cover reasonable return post expense. Please ensure that you have ordered for your correct model and year of vehicle.

We recommend you have items fitted by a qualified professional mechanic, and cannot be held responsible for faults which result from incorrect fitting and assembly. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Other Engine Parts".

The seller is "powerhouse-uk" and is located in this country: GB. This item can be shipped worldwide.

  • Manufacturer: BMW Mini
  • Type: Engines & Components
  • Manufacturer Part Number: PH00128AD
  • Brand: Powerhouse

BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+  BMW Mini JCW M45 Supercharger Snout Bearings Kit John Cooper Works 2006+