Supercharger Kit Mini

Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6

Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6
Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6

Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6    Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6

MINI BLIZZARD PERFORMANCE INTERCOOLER KIT FOR HOLDEN SUPERCHARGED L67 3.8L V6. To our blizzard range of water to air intercoolers, is their composite thermal resistant housing!

What this means this means is that our coolers do a much better job of cooling the air from the supercharger, compared to their aluminium counterparts as the composite housing doesn't absorb anywhere near as much heat from the engine! Not only does this improve outright power, but also significantly reduces heat soak issues over conventional aluminium housings. The above benefits stem from the fact that our composite material has a thermal conductivity of 0.29 W/mK as opposed to 150 W/mK for aluminium. Therefore, our composite material conducts heat 500 times less than Aluminium! To see the difference between aluminium and our thermal composite material, check out our intercooler test video clip below.

With the installation our mini blizzard intercooler, it allows you to drop from a 3.4'' to either a 3.25'' or 3.2 inch pulley, on a virtually stock car and all without the need of an expensive tune. In addition, car idle and drivability remain unchanged even with the factory tune! You can run an even smaller pulley for higher boost, but then you ll most likely require a custom tune. By dropping down in pulley size from 3.4'' to 3.2'' and the inclusion of our water to air cooler kit, gains of around 30hp are common. Higher horsepower gains can be achieved by further reducing pulley size.

To give you an example in regards to what our mini blizzard intercooler is capable of, shown below is a dyno graph of our cooler in action. The only mods that this car had to achieve these results are as follows.

MACE mini blizzard intercooler kit. MACE 1.9 ratio rockers. MACE Cold air replacement air box kit.

Twin 2 1/2 exhaust cat back exhaust system, no extractors or hi-flow cats! The mini only raises the supercharger a mere 25mm so it will easily fit under the bonnet of your Commodore, without having to modify your air-box ducting, coil pack or bonnet.

In many cases you can still retain your strut tower brace (subject to brace type) in your Commodore with the installation of our mini blizzard intercooler. Shown below are a couple of pics of a customer's mini blizzard installation.

3 piece core, with our. Full size front mount radiator (600X330X50mm). All hoses including fill kit. This kit comes with everything you need except for engine coolant (genuine Holden coolant required) and a new supercharger belt. We also offer precision CNC porting of the supercharger and lower intake manifold at extra cost.

As every car is different, we always recommend that you get your intercooler kit installed by a professional or at least inspected by one, to determine as to whether or not your car needs a tune. Please confirm which part number you require while checking out. Intermediate (52mm thick) and mega blizzard (58mm thick) cooler kits are also available in another listing.

Please remember to check out our other performance products for sale. We are committed to providing the best support for our products.

It may take longer than this due to the circumstances being out of our control, such as Government restrictions or flight cancellations. Orders are neither dispatched nor delivered on weekends. Orders outside of Australia may take up to 4 weeks or more due to the circumstances being out of our control, such as Government restrictions or flight cancellations. Here at Mace Engineering, we pride ourselves in delivering quality products and services at competitive prices for most of today's makes and models. Originally focused on design and manufacture of performance upgrades for the Holden V6 and the Ford straight-6, the desire of satisfying a larger market became a priority.

We now have an extensive assortment of standard replacement and performance aftermarket components which are supplied to both established workshops and a rapidly growing customer base. Our dedicated team of qualified mechanical and automotive engineers are always ready to answer any technical questions with high-value engineering solutions. With the substantial range of engineering design and SAE spec literature on hand, we can assure you that our problem-solving capabilities are genuine and accurate. A majority of our team also has the first-hand experience in motorsport and vehicle restorations and are more than happy to offer any sort of advice in these areas. Our manufacturing facility is operated by highly skilled technicians with over 30 years of international experience. The niche items we manufacture in-house are made within minimal tolerance and are tested & inspected prior to dispatch. If time allows, we also have the expertise to design and manufacture one-off components for specific builds. Our mission is to deliver world-class customer service experience and endeavour to be at the forefront of the automotive industry. The item "MINI BLIZZARD PERFORMANCE INTERCOOLER KIT FOR HOLDEN SUPERCHARGED L67 3.8L V6" is in sale since Monday, May 8, 2017. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Performance Parts\Turbo Chargers & Parts". The seller is "mace_engineering_group" and is located in Melbourne, VIC. This item can be shipped worldwide.
  • Brand: MACE
  • Manufacturer Part Number: WAI601, WAI602

Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6    Mini Blizzard Performance Intercooler Kit For Holden Supercharged L67 3.8l V6